014.Kubernetes二进制部署docker

一 部署docker

1.1 部署docker组件

docker 运行和管理容器，kubelet 通过 Container Runtime Interface (CRI) 与它进行交互。

1.2 下载docker

1 [root@k8smaster01 ~]# cd /opt/k8s/work  2 [root@k8smaster01 work]# wget https://download.docker.com/linux/static/stable/x86_64/docker-18.09.6.tgz  3 [root@k8smaster01 work]# tar -xvf docker-18.09.6.tgz

提示：更多docker版本下载参考https://download.docker.com/linux/static/stable/x86_64/。

1.3 安装和部署docker

1 [root@k8smaster01 ~]# cd /opt/k8s/work  2 [root@k8smaster01 work]# source /opt/k8s/bin/environment.sh  3 [root@k8smaster01 work]# for all_ip in ${ALL_IPS[@]}  4   do  5     echo ">>> ${all_ip}"  6     scp docker/*  root@${all_ip}:/opt/k8s/bin/  7     ssh root@${all_ip} "chmod +x /opt/k8s/bin/*"  8   done

1.4 配置docker system

1 [root@k8smaster01 ~]# cd /opt/k8s/work  2 [root@k8smaster01 work]# cat > docker.service <<"EOF"  3 [Unit]  4 Description=Docker Application Container Engine  5 Documentation=http://docs.docker.io  6   7 [Service]  8 WorkingDirectory=##DOCKER_DIR##  9 Environment="PATH=/opt/k8s/bin:/bin:/sbin:/usr/bin:/usr/sbin" 10 EnvironmentFile=-/run/flannel/docker 11 ExecStart=/opt/k8s/bin/dockerd $DOCKER_NETWORK_OPTIONS 12 ExecReload=/bin/kill -s HUP $MAINPID 13 Restart=on-failure 14 RestartSec=5 15 LimitNOFILE=infinity 16 LimitNPROC=infinity 17 LimitCORE=infinity 18 Delegate=yes 19 KillMode=process 20  21 [Install] 22 WantedBy=multi-user.target 23 EOF

解释：

  • EOF 前后有双引号，这样 bash 不会替换文档中的变量，如 $DOCKER_NETWORK_OPTIONS (这些环境变量是 systemd 负责替换的。)；
  • dockerd 运行时会调用其它 docker 命令，如 docker-proxy，所以需要将 docker 命令所在的目录加到 PATH 环境变量中；
  • flanneld 启动时将网络配置写入 /run/flannel/docker 文件中，dockerd 启动前读取该文件中的环境变量 DOCKER_NETWORK_OPTIONS ，然后设置 docker0 网桥网段；
  • 如果指定了多个 EnvironmentFile 选项，则必须将 /run/flannel/docker 放在最后(确保 docker0 使用 flanneld 生成的 bip 参数)；
  • docker 需要以 root 用于运行；
  • docker 从 1.13 版本开始，可能将 iptables FORWARD chain的默认策略设置为DROP，从而导致 ping 其它 Node 上的 Pod IP 失败，遇到这种情况时，需要手动设置策略为 ACCEPT：
1 [root@k8smaster01 ~]# echo '/sbin/iptables -P FORWARD ACCEPT' >> /etc/rc.local

并且把以下命令写入 /etc/rc.local 文件中，防止节点重启iptables FORWARD chain的默认策略又还原为DROP

1.5 分发docker systemd

1 [root@k8smaster01 ~]# cd /opt/k8s/work  2 [root@k8smaster01 work]# source /opt/k8s/bin/environment.sh  3 [root@k8smaster01 work]# sed -i -e "s|##DOCKER_DIR##|${DOCKER_DIR}|" docker.service  4 [root@k8smaster01 work]# for all_ip in ${ALL_IPS[@]}  5   do  6     echo ">>> ${all_ip}"  7     scp docker.service root@${all_ip}:/etc/systemd/system/  8   done

1.6 配置docker配置文件

1 [root@k8smaster01 ~]# cd /opt/k8s/work  2 [root@k8smaster01 work]# source /opt/k8s/bin/environment.sh  3 [root@k8smaster01 work]# cat > docker-daemon.json <<EOF  4 {  5     "registry-mirrors": ["https://docker.mirrors.ustc.edu.cn","https://hub-mirror.c.163.com"],  6     "insecure-registries": ["docker02:35000"],  7     "max-concurrent-downloads": 20,  8     "live-restore": true,  9     "max-concurrent-uploads": 10, 10     "debug": true, 11     "data-root": "${DOCKER_DIR}/data", 12     "exec-root": "${DOCKER_DIR}/exec", 13     "log-opts": { 14       "max-size": "100m", 15       "max-file": "5" 16     } 17 } 18 EOF

1.7 分发docker配置文件

1 [root@k8smaster01 ~]# cd /opt/k8s/work  2 [root@k8smaster01 work]# source /opt/k8s/bin/environment.sh  3 [root@k8smaster01 work]# for all_ip in ${ALL_IPS[@]}  4   do  5     echo ">>> ${all_ip}"  6     ssh root@${all_ip} "mkdir -p /etc/docker/ ${DOCKER_DIR}/{data,exec}"  7     scp docker-daemon.json root@${all_ip}:/etc/docker/daemon.json  8   done

二 启动并验证

2.1 启动docker

1 [root@k8smaster01 ~]# source /opt/k8s/bin/environment.sh  2 [root@k8smaster01 ~]# for all_ip in ${ALL_IPS[@]}  3   do  4     echo ">>> ${all_ip}"  5     ssh root@${all_ip} "systemctl daemon-reload && systemctl enable docker && systemctl restart docker"  6   done

2.2 检查docker服务

1 [root@k8smaster01 ~]# source /opt/k8s/bin/environment.sh  2 [root@k8smaster01 ~]# for all_ip in ${ALL_IPS[@]}  3   do  4     echo ">>> ${all_ip}"  5     ssh root@${all_ip} "systemctl status docker|grep Active"  6   done

2.3 检查docker 0网桥

1 [root@k8smaster01 ~]# source /opt/k8s/bin/environment.sh  2 [root@k8smaster01 ~]# for all_ip in ${ALL_IPS[@]}  3   do  4     echo ">>> ${all_ip}"  5     ssh root@${all_ip} "/usr/sbin/ip addr show flannel.1 && /usr/sbin/ip addr show docker0"  6   done

提示：确认各 worker 节点的 docker0 网桥和 flannel.1 接口的 IP 处于同对应的相同网段中。

2.4 查看docker信息

1 [root@k8smaster01 ~]# ps -elfH|grep docker | grep -v grep  2 [root@k8smaster01 ~]# docker info
赞 (0)

相关推荐