Hofmann重排

1881年,A.W Hofmann发现利用溴和钠(或氢氧化钾)处理乙酰胺可以得到N-溴代乙酰胺。接着碱性条件下脱质子,加热,N-溴代乙酰胺在无水条件下重排为甲基异氰酸酯,在水中则生成甲胺。

伯酰胺通过次卤化物处理(或氧化)经过异氰酸酯中间体生成少一个碳的伯胺的反应,被称为Hofmann重排反应或Hofmann降解反应。最早期的Hofmann重排是使用KOH水溶液和Br2来实施的。这个条件比较剧烈,后续有许多改进的方法,主要是通过氧化剂和碱来实现的。如Keillor等人1997年报道了用NBS做氧化剂,DBU做碱,甲醇中回流25分钟就得到了甲氧羰基保护的胺(JOC1997, 62, 7495-7496)。在四乙酸铅或高价碘(PIDA, PIFA, PhI(OH)OTs)氧化条件下,可以在酸性条件下进行Hofmann重排。酰胺α-碳如果有手性,重排后构型保持。α,β-不饱和酰胺或α-羟基酰胺进行Hofmann重排会生成醛酮。

反应机理

反应实例

Arch. Pharmacol Res. 1994, 17, 490–491】

Tetrahedron Lett. 2001, 42, 1449–1452】

Steroids 2001, 66, 655–662】

Carbohydr. Chem. 2005, 24, 529–547】

Phosphorus, Sulfur Silicon Relat. Elem. 2006, 181, 2505–2517】

Synthesis 2007, 744–748】

A mixture of indazole (4 g, 0.02 mole) and sodium hydroxide(4 g, 0.1 mole) in 30 ml of icewater containing 1.5 g. (0.02 mole) of chlorinewas stirred at room temperature for 2 hours. Then the reaction was warmed on asteam-bath for 1 hour during which time the solution was effected. The solutionwas extracted four times with 50 ml. of ethyl acetate, and the extracts weredried with anhydrous magnesium sulfate. Ether containing hydrogen chloride wasadded, and the mixture was allowed to stand for several days. The solid wascollected recrystallized from ethyl alcohol to give the target compound (3 g,64% yield)

Reference: JACS, 1958, 965

Sodium hydroxide (3.48 kg, 87.0 mol) was dissolved inwater (22 L), and the solution was cooled to 0°C. Bromine (0.63 L, 11.8 mol)was added over 30 min while the temperature was maintained at 0-10°C. In a secondvessel, (R)-tosylasparagine(2.86 kg, 9.48 mol) was added in portions to a solution of NaOH (0.8 kg, 20.0mol) in water (7.2 L) kept cold at 0-10°C. The solution was cooled to 0°C, andthe sodium hypobromite solution was added over 10 min while maintaining atemperature <10°C.After the addition, the resulting yellow solution was aged for 15 min at 10-15°C, and thenheated to 40°C within 30 min. Heating was suspended and the reactiontemperature was allowed to increase to 50°C over 20 min due to the exothermicreaction. When the internal temperature dropped to 45°C, the reaction solutionwas heated to 70°C over 20 min and kept at 70°C for 10 min. HPLC analysismeasured a 90% solution yield of compound 2.The reaction was cooled to 10-15°C, and with vigorous stirring the pHof the mixture was adjusted to 7 by the addition of concentrated hydrochloricacid (4 L), whereupon the product precipitated. The mixture was stirred for 20min at 15°C, and the product was filtered. The cake was slurry washed with water(2-8 L) and then displacement washed with water (8 L). The product was driedwith a nitrogen stream at 20°C affording (2R)-3-amino tosylaminoalanine(1.67 kg, 70%).

Reference: JOC, 1998, 63, 9533-9534.

p-Methoxybenzamide (76 mg, 0.5 mmol), NBS (90 mg, 0.5mmol), and DBU (230 uL) in methanol (5 mL) were heated at reflux for 15 min, atwhich point more NBS (90 mg, 0.5 mmol) was added. The reaction was allowed tocontinue for another 10 min. Methanol was then removed by rotary evaporation, andthe residue was dissolved in 50 mL of EtOAc. The EtOAc solution was washed with5% HCl and saturated NaHCO3 and was then dried over MgSO4.The product, methyl (p-methoxyphenyl) carbamate, was purified by flash columnchromatography (silica gel, eluant 5% EtOAc in CH2Cl2) togive a white solid (86 mg, 95%),

Reference: JOC, 1997, 62, 7495-7496.

A slurry of N-benzyloxycarbonyl-L-asparagine(140 g, 0.53 mol), ethyl acetate(680 mL), acetonitrile (680 mL), water (340 mL),and Iodobenzene I,I-diacetate (200 g, 0.62 mol) was cooled and stirred at 16°C for 30min. the temperature was allowed to reach to 20°C, and the reaction was stirred until completion (4h).The mixture was cooled to 5°C, and the product was filtered, washed with ethylacetate (100 mL), and dried in vacuo at 50°C to afford the target compound (100 g, 79%)

A 500-mL, round-bottomed flask is equipped with amagnetic stirring bar and covered with aluminum foil. To the flask was added asolution of PhI(OCF3)(16.13 g, 37.5 mmol) in 37.5 mL of acetonitrile, and theresulting solution was diluted with 37.5 mL of distilled deionized water.Cyclobutanecarboxamide (2.48 g, 25 mmol) was added; the amide quickly dissolves.Stirring was continued for 4 hr, and the acetonitrile was removed with a rotaryevaporator. The aqueous layer was stirred with 250 mL of diethyl ether; to thestirring mixture was added 50 mL of concd hydrochloric acid. The mixture wastransferred to a separatory funnel and the layers were separated. The aqueouslayer was extracted with ether (2*150 mL). The organic fractions were combinedand extracted with 75 mL of 2 N hydrochloric acid. The aqueous fractions arecombined and concentrated with a rotary evaporator using a vacuum pump. Benzene(50 mL) was added to the residue and the solution was concentrated with therotary evaporator, again using a vacuum pump. Addition of benzene andconcentration was repeated five more times. The crude solid was dried underreduced pressure over sulfuric acid overnight. To the product was added 5 mL ofabsolute ethanol and 35 mL of anhydrous ether, and the solution was heated atreflux on a steam bath. Ethanol was added slowly to the mixture, with swirling,until all the material was dissolved; the solution was cooled to roomtemperature. Anhydrous ether was added slowly until crystallization justbegins. The flask was placed in the freezer and the product was allowed tocrystallize. Filtration of the product and drying overnight under reducedpressure over phosphorus pentoxide to provide cyclobutylamine hydrochloride(1.86–2.06 g, 69–77%).

Reference:Organic Syntheses, Coll. Vol. 8, p.132; Vol. 66, p.132

参考资料

一、Name Reactions (A Collection of Detailed Reaction Mechanisms), Jie Jack Li, Hofmann rearrangement,page 319-320.

二、Strategic Applications of Named Reactions in Organic Synthesis, László Kürti andBarbara Czakó, Hofmann rearrangement, page 210-211.

(0)

相关推荐

  • 由芳香磺酸制备芳香磺酰氯

    芳香磺酸或盐可以用一些氯化试剂比如五氯化磷,三氯氧磷,二氯化砜,氯磺酸,双光气,三光气,草酰氯等处理得到芳香磺酰氯.这几种氯磺化试剂各有优缺点,五氯化磷,三氯氧磷反应效果较好,但是后处理比较繁琐,反应 ...

  • 利用硝酰氯或硝酸酯进行硝化反应

    NO2Cl(硝酰氯)以前是由发烟硝酸和氯磺酸制得,由于这个方法不方便以及危险性大,另一个替代方法是 NaNO3/TMSCl/AlCl3体系[Olah, G. A; Ramaiah, G, Synthe ...

  • 【硝化反应】烯烃的硝化反应(下)

    烯烃在常压常温一氧化氮(NO)作用下,可以以很好的收率制备得到相应的硝基烯烃,同时有20%的β-硝基醇生产.而硝基醇副产物在酸性氧化铝作用下脱氢后可以完全转化为相应的硝基烯烃.这个简便的硝化方法已经成 ...

  • 活性二氧化锰氧化

    二氧化锰在有机化学中十分有用,被用于氧化物的二氧化锰的形态不一,因为二氧化锰有多个结晶形态,化学式方面可以写成MnO2-x(H2O)n,其中x介于0至0.5之间,而n可以大于0.二氧化锰可在不同pH下 ...

  • Roskamp-Feng反应

    1989年,Roskamp首先报道了利用氯化亚锡催化乙基重氮乙酸乙酯和醛反应制备β-酮酯的反应[J. Org. Chem., 1989, 54, 3258].经过二十多年的发展各种路易斯酸(Sc(OT ...

  • Rosenmund-von Braun反应

    芳基卤化物和过量的氰化亚铜在高沸点极性溶剂(如DMF,NMP, 硝基苯和吡啶)中回流反应得到芳基腈类化合物的反应.此反应通常需要较高温度进行(150℃以上),三级胺和吡啶对此反应有促进作用,硫酸铜也可 ...

  • Comins三氟甲磺酸化试剂

    N,N-二三氟甲磺酰基-5-氯-2-氨基吡啶或N,N-二三氟甲磺酰基苯胺,此类芳胺的二三氟甲磺酰胺被称为Comins三氟甲磺酸化试剂.其可以将酮类,酯,硫代酸酯转化为相应的三氟甲磺酸烯酯.由于此试剂的 ...

  • Angeli-Riminia羟肟酸合成

    碱性条件下,醛和N-磺酰基羟胺反应生成羟肟酸的反应.反应的副产物是亚磺酸. 此反应由意大利化学家Angelo Angeli 和 Enrico Rimini在1896年发现.此反应可以用于醛的颜色测试. ...

  • Garigipati脒合成反应

    三甲基铝和氯化铵反应得到MeAlClNH2,其和腈反应得到脒. Adamantane amidine hydrochloride (5). Cold Me3Al 1 (25 mL, 50 mmol) ...

  • 由酸制备α-卤代酮

    一般情况下,酸先转化为酰氯,一种方法是酰氯和重氮甲烷或TMS重氮甲烷反应得到重氮酮,用相应的卤化氢处理即可高产率得到α-卤代酮.第二种方法是 卤乙酰卤与N-甲氧基-N-甲基氯化铵反应得到weinreb ...

  • 【硝化反应】烯烃的硝化反应

    烯烃硝化后通常得到共轭的硝基烯烃,而它是有机合成中非常有用的中间体.硝基烯烃一般通过烯烃的硝化或者是2-硝基醇的Henry脱氢制备得到.使用硝酸对烯烃进行硝化通常得到适中的收率,然而这种方法因为缺乏选 ...

  • Meth-Cohn喹啉合成反应

    1978年,Meth-Cohn课题组报道了乙酰基芳胺和Vilsmeier-Haack试剂反应得到2-氯-3-喹啉甲醛(68%产率).酰基芳胺和Vilsmeier试剂在加热条件下反应关环得到2-氯-3- ...

  • Crabtree导向氢化催化剂

    导向性烯烃氢化催化剂--铱催化剂:[Ir(cod)(PCy3)pyr]PF6或上图的催化剂3 {BArF=四[2,5-二(三氟甲氧基)苯基]硼}.常见的导向基团:OH, OMe, C55O, CO2M ...

  • 四氟硼酸硝硝化反应

    NO2BF4 是一种很强的硝化试剂,但是其制备不方便,其是由硝酸,氢氟酸和三氟化硼反应制得.当苯环被吸电子基团钝化,用一般的方法难以硝化,而此类试剂则能顺利实现硝化,这种方法对合成多硝基取代的化合物比 ...

  • 钯催化烯丙醇室温下胺基化新方法

    烯丙胺结构广泛存在于天然产物,药物,功能材料和农药中,因此对于烯丙胺的研究有很高的应用价值.现存的很多药物中都含有烯丙胺结构,因此寻找一种高效稳定的合成烯丙胺的方法有着重要的意义. 合成烯丙胺骨架的最 ...

  • 【硝化反应】肟氧化为硝基化合物

    将羰基转化成硝基 (retro Nef Reaction) 是制备硝基化合物的一个重要的合成方法.这种转化通常是通过用强氧化剂(如CF3CO3H)把肟氧化成硝基来实现1. 无水CF3CO3H很难处理, ...

  • 【硝化反应】活泼 C- H 化合物的硝化反应

    活泼亚甲基化合物在亲电硝化剂如烷基硝酸酯作用下发生硝化反应,通常都会经历碳负离子中间体的反应过程.烷基硝酸酯硝化反应方法已被广泛用于芳香硝基甲烷的制备.带有吸电子基团的甲苯衍生物,在氨基钾存在下在液氨 ...

  • 【硝化反应】氨基氧化合成硝基化合物

    氨基化合物的氧化 直接将伯胺氧化成相应的硝基化合物,是工业制备脂肪族硝基化合物应用最广泛的方法.因为,它能够提供应用直接硝化方法难以得到的硝化物.本节介绍了一些将伯胺转化成硝基化合物的合成方法. 饱和 ...

  • 由醛肟制备腈

    醛肟和一些羟基活化试剂作用进行顺式消除得到腈.常见的活化试剂有:乙酸酐,Tf2O,甲磺酰氯,Nonafluorobutanesulfonyl fluoride, BrCCl3/PPh3,TBBDA/P ...

  • 霍夫曼重排(Hofmann Rearrangement)

    概要 是指一级酰胺在卤素(溴活氯)和碱的作用下产生异氰酸酯后重排转变为少一个碳原子的伯胺的反应. 该反应的小缺点是必须使用强碱. 四乙酸铅或者高价碘试剂作为改良条件经常被应用于该反应.而且后者的话可以 ...