印度对钢产品强制认证清单

钢产品1.IS 1785 (Part 1)：1983Specification for Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire预应力混凝土扁平硬拉钢丝规范 第一部分 冷拉应力消除钢丝2.IS 1785 (Part 2): 1983Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire预应力混凝土扁平硬拉钢丝规格 第二部分 冷拉钢丝3.IS 6003:2010Indented wire for Pre-stressed concrete预应力混凝土刻痕钢丝规格4.IS 6006:2014Uncoated stress relieved strand for Pre-stressed concrete预应力混凝土未涂层应力消失链规格5.IS 13620：1993Fusion bonded epoxy coated reinforcing bars熔接环氧涂层钢筋规格6.IS 14268:1995Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete预应力混凝土未涂层应力消失低松弛七层链规格7.IS 277:2018Galvanized steel sheets (plain and corrugated)镀锌钢板（平板和波纹板）8.IS 2002:2009Steel plates for pressure vessels for intermediate and high temperature service including boilers中高温压力容器钢板包括锅炉9.IS 2041:2009Steel plates for pressure vessels used at moderate and low temperature中低温压力容器钢板10.IS 2830:2012Carbon steel cast billet ingots, billets, blooms and slabs for rerolling into steel for general structural purpose一般结构用途复压钢材的碳钢铸件坯料坯锭，坯料，印花和厚片11.IS 1786:2008High strength deformed steel bars and wires for concrete reinforcement混凝土配筋的高强度变形钢条和钢线12.IS 648:2006Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)冷轧非取向电工钢板和条状整加工型（CRNO）13.IS 3024:2015Grain oriented electrical steel sheet & strip (CRGO)取向电钢板及钢条（CRGO）14.IS 15391:2003Cold Rolled Non-Oriented Electrical Steel Sheet and Strip – Semi-Processed Type冷轧非取向电工钢板和条状半加工型（CRNO）15.IS 2062:2011Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6mm and structurals below(50mm x 50mm x 6mm)热轧中高强度结构钢,除直径与厚度低于6毫米并且规格小于（50毫米x50毫米x6毫米）的钢棒16.IS 432: Part 1：1982Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and medium tensile steel bars混凝土钢筋用低碳钢和中等抗拉钢柱和硬拉钢线 第一部分低碳钢和中等抗拉钢柱17.IS 432: Part 2: 1982Mild Steel and Medium Tensile steel bars and Hard-Drawn Steel Wire for concrete Reinforcement: Part 2 Hard-Drawn Steel Wire混凝土钢筋用低碳钢和中等抗拉钢柱和硬拉钢线 第一部分低碳钢和中等抗拉钢柱18.IS 513（Part 1）:2016Cold reduced low carbon steel sheets and strip Part 1 Cold forming and drawing purpose冷轧低碳钢板及钢带第1部分冷成型与拉伸用途19.IS 432 : Part 2 : 1982Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel冷轧碳素钢板和钢带第2部分高强度多相钢20.IS 1079:2017Hot Rolled Carbon Steel Sheet and Strip热轧碳钢薄板及钢带21.IS1875:1992Carbon steel billets, blooms, slabs and bars for forgings.锻件用碳素钢坯料、钢坯、板坯和棒材。22.IS 2879:1998Mild steel for metal arc welding electrodes低碳钢金属弧焊电焊条23.IS 3502:2009Steel Chequered Plates网纹钢板24.IS 5872:1990Cold Rolled Steel Strips (Box Strappings)冷轧钢条（箱式捆扎）25.IS 5986:2017Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes.用于成形和翻边目的的热轧钢板，钢板和钢带。26.IS 6240:2008Hot Rolled Steel Plate (up to 6mm) Sheet and Strip for the Manufacture of Low-Pressure Liquefiable Gas Cylinders低压液化的气体钢瓶的制造用热轧钢薄板（6mm以下）和钢条27.IS 7283:1992Hot Rolled Bars for production of bright bars and machined parts for engineering applications光圆钢筋生产和工程应用已加工零件用热轧钢筋28.IS 7887:1992Mild steel wire rods for general engineering purposes一般工程用低碳钢丝线材29.IS 10748:2004Hot Rolled Steel Strip for Welded Tubes and Pipes焊接管材用热轧钢条30.IS 11513:2017Hot Rolled Carbon Steel Strip For Cold Rolling Purposes冷压延用热轧碳钢条31.IS 15647:2006Hot rolled steel narrow width strip for welded tubes and pipes焊接管材用热轧窄钢带32.IS7904:2017High carbon steel wire rods-specification高碳钢线材-规范33.IS14246:2013Continuously pre-painted galvanized steel sheets and coils连续彩涂镀锌钢板和钢卷34.IS15965:2012Pre-painted aluminum zinc alloy metallic coated steel strip and sheet(Plain)彩涂铝锌合金镀层钢带和钢板35.IS 280:2006Mild steel wire for General Engineering purposes.一般工程用软钢丝36.IS 1835 : 1976Round steel wire for ropes圆钢丝钢绳37.IS 3975: 1999Low carbon Galvanized steel wires, formed wires and Tapes for armouring of cables.电缆铠装用低碳镀锌钢丝，成型丝和钢带38.IS 4368: 1967Alloy Steel billets, blooms and slabs for forging for general engineering purposes一般工程用锻造合金钢钢坯、方坯及厚板39.IS4454(Part1):2001Steel wires for mechanical springs, Part 1 cold drawn unalloyed steel wire.机械弹簧用钢丝第1部分冷拉非合金钢丝40.IS4454(Part2):2001Steel wire for mechanical springs Part 2: oil hardened and tempered steel wire.机械弹簧用钢丝第2部分油淬和回火钢丝41.IS 4824: 2006Bead Wires for Tyres轮胎胎圈钢丝42.IS11169(Part1):1984Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels. 冷镦/冷挤压用钢第1部分锻碳和低合金钢43.IS 11587:1986Structural Weather resistant steel . 耐候结构钢44.IS 15103:2002Fire resistant steel-specification耐火钢-规范45.IS15914:2011High Tensile Strength Flat Rolled Steel Plate (Up To 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. 用于焊接气瓶制造的高抗拉强度扁钢钢板(6mm及以下)，薄板和带材，46.IS15961:2012Hot Dip aluminium – Zinc alloy metallic coated steel strip and sheet (plain). 热浸镀铝锌合金金属镀层钢带和薄板(普通钢)47.IS15962:2012Structural Steel for Building for Structures with improved seismic Resistance.提高抗震性能结构的建筑用结构钢48.IS6527:1995Stainless Steel Wire Rod.不锈钢盘条49.IS 6528 :1995Stainless Steel Wire不锈钢丝50.IS 6603 : 2001Stainless Steel Bars and Flats.不锈钢棒和扁钢51.IS 5522：2014Stainless steel sheets and strips for utensils Specification餐具用不锈钢板和钢带52.IS 6911: 2017Stainless steel plate, sheet and strip – Specification不锈钢钢板，薄板和钢带-规范53.IS15997:2012Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Appliances – Specification餐具和厨房电器用低镍奥氏体不锈钢板和钢带54.IS1110:1990Ferrosilicon – Specification硅铁-规范55.IS4409:1973Specification for Ferronickel镍铁规范56.IS 1029 : 1970Specification for Hot rolled steel strip (bailing)热轧带钢规范57.IS 2385 : 1977Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate冷还原马口铁和冷还原黑钢板用热轧软钢卷板及带钢-规范58.IS 3039 : 1988Specification for Structural steel for construction of hulls of ships船体结构用钢规范59.IS 9550 2001Bright steel bars - v Specification光亮钢棒规范60.IS 3748 : 1990Tool and die steels – Specification工具和模具钢规范61.IS 5517 : 1993Steel for hardening and tempering – Specification淬火和回火用钢-规范62.IS 7291 : 1981Specification for High speed tool steels高速工具钢规范63.IS 7494 : 1981Specification forSteel for valves for internal combustion engines内燃机用阀门钢规范64.IS12146:1987Specification forCarbon manganese steel forgings for pressure vessels压力容器用碳锰钢锻件规范65.IS16585:2016Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state.磁性材料-个别材料规范-半加工状态下交货的铁基非晶带材66.IS2831:2012Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification重新轧制成结构钢的碳钢铸钢坯锭、钢坯、方坯和厚板(普通质量)-规范67.IS 1148: 2009Steel Rivet Bars (medium And High Tensile) – For Structural Purposes钢铆钉棒（中高强度）-结构用68.IS 1673: 1984Specification for Mild Steel Wire, Cold Heading Quality低碳钢钢丝，冷镦质量规范69.IS 1812: 1982Specification for Carbon Steel Wire for the Manufacture of Wood Screws木螺钉制造用碳素钢丝规范70.IS 2507: 1975Specification for Cold – rolled Steel Strips For Springs弹簧用冷轧钢带规范71.IS 2255: 1977Specification for Mild Steel Wire Rod for the Manufactureof Machine Screws (By Cold Heading Process)机械螺钉制造用软钢线材规范（冷镦法）72.IS 3195: 1992Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) - Specification蜗壳和螺旋弹簧制造用钢（铁路车辆用）-规范73.IS 3431: 1982Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension汽车悬架用蜗壳，螺旋和叠片弹簧制造钢规范74.IS 3885-Part-1: 1992制造叠层弹簧用钢（铁路车辆）第1部分 扁钢规范75.IS 3885-Part-2: 1992Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification制造叠层弹簧用钢（铁路车辆）第2部分 铁轨和凹槽部分76.IS 4223: 1975Specification for Steel Wire for Umbrella Ribs伞骨用钢丝规范77.IS 4224: 1972Specification for Steel Wire for Staples, Pins And Clips订书钉，别针和夹子用钢丝规范78.IS 4397 : 1999Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification滚珠和滚子轴承保持架/保持架的冷轧碳钢带规范79.IS 4398 : 1994Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification用于制造球，滚子和轴承座圈的碳铬钢-规范80.IS 6902: 1973Specification for Steel Wire for spokes辐条钢丝规范81.IS 6967: 1973Specification for Steel For Electrically welded round Link Chains电焊圆形链条用钢规范82.IS 7226: 1974Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes一般工程用冷轧中，高碳和低合金钢带规范83.IS 7557: 1982Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets（20 mm及以下）用于冷锻铆钉制造用钢丝-规范84.IS 8052 : 2006Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications –Specification制造一般工程应用的弹簧，铆钉和螺钉的钢锭，钢坯和大方坯–规定85.IS 8951: 2001Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods-Specification制造高碳钢盘条用的铸钢坯锭，方坯和大方坯-规范86.IS 8952: 1995Steel ingots, blooms and billets for production of mild steelwire rods for general engineering purposes - Specification生产一般工程用软钢线材的钢锭，大方坯和方坯-规范87.IS 9476 : 1980Specification for Cold rolledsteel strips for carbon steelrazor blades碳钢剃须刀刀片用冷轧钢带规范88.IS 9962 : 1981Specification for Steel Wire for Needles针用钢丝规格89.IS 12367:1988Specification for Cold-rolledCarbon Steel Strips/ Coils forManufacture of Welded Tubes制造焊接管用的冷轧碳素钢带/卷规范90.IS 14331:1995Steels for High Temperature Bolting Applications -Specification高温螺栓用钢规范91.IS 14491:1997Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification冷成型用低碳高强度冷轧钢板和钢卷92.IS 14650:1999Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification低碳高强度冷轧薄钢板和卷材-规范93.IS 4882: 1979Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry轴承工业用铆钉用低碳钢丝规范94.IS 2090:1983Specification For High Tensile Steel Bars Used In Pre-stressed Concrete预应力混凝土用高强度钢筋规格95.IS 6529:1996Stainless Steel Blooms Billets And Slabs For Forging不锈钢大方坯锻造方坯和板坯96.IS 9294:1979Cold-Rolled Stainless Steel Strips for Razor Blades刀片用冷轧不锈钢带97.IS 10631:1983Stainless steel for welding electrode core wire焊接用不锈钢电极芯线98.IS 10631 (Part2):1983Specification for Non Magnetic stainless steels for electrical applicationsPart 2 Specific requirements for binding wire.电气用非磁性不锈钢规范第2部分绑线的特殊要求99.IS 10631 (Part 3):1983Specification for Non Magnetic stainless steels for electrical applicationsPart 3 Specific requirements for sheets, strips and plates.电气用非磁性不锈钢规范第3部分薄板，带材和板材的特殊要求。100.IS 11169 (Part2):1989Steels for cold heading/ cold extrusion applications – specificationPart 2 Stainless steel冷镦钢及冷挤压用钢的使用规范第2部分不锈钢101.IS 5651:1987Steels for Pneumatic Tools气动工具用钢102.IS 9516:1980Heat Resisting Steels耐热钢103.IS 11952:1986Steels For Piston Pins (gudgeon Pins)活塞销用钢（活塞销）104.IS 12045:1987Alloys Used in ElectricalResistance Metallic Heating Elements电阻金属加热元件中使用的合金105.IS 14652:199918 Percent Nickel Maraging Steel Bars and Rods18％镍马氏体时效钢棒106.IS 1566:1982Specification for Hard-drawn Steel Wire Fabric For ConcreteReinforcement钢筋混凝土用硬拉钢丝织物规范107.IS 5489:1975Carburizing Steels For Use in Bearing Industry轴承行业用渗碳钢108.IS 11946:1987Soft Magnetic Iron Strips软磁性铁条109.IS 11947:1987Soft Magnetic Iron Rods, Bars, Flats and Sections软磁性铁棒，棒，扁钢和型材110.IS 963:1958Chrome molybdenum steel bars and rods for aircraft purposes飞机用铬钼钢棒111.IS 4454(Part 4):2001Steel Wires for MechanicalSprings - Part 4 : Stainless Steel Wire机械弹簧用钢丝第4部分：不锈钢丝112.IS 1993 : 2018Cold-reduced Electrolytic Tin Plate冷还原电解镀锡板113.IS 12591:2018Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel冷还原电解铬/氧化铬涂层钢114.IS 412:1975Expanded Metal Steel Sheets For General Purposes通用钢板网115.IS 2100: 1970Steel Billets,Bars And Sections For Boilers锅炉用钢坯，棒材和型材116.IS 2589: 1975Hard Drawn Steel Wire For Upholstery Springs软垫弹簧用冷拔钢丝117.IS 3298: 1981Mild Steel Rivet Bars For Ship Building造船用低碳钢铆钉条118.IS 4072: 1975Steel For Spring Washers弹簧垫圈用钢119.IS 8510 (Part II): 1977Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires电枢和转子捆扎用钢丝第二部分磁性捆扎线的特殊要求120.IS 8510 (Part III): 1977Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires电枢和转子捆扎用镀锡钢丝第三部分非磁性捆扎线的特殊要求121.IS 8563: 1977Half Round Mild Steel Wire For The Manufacture of Split Pins制造开口销用半圆形低碳钢丝122.IS 8564: 1977Steel Wire For Nipples For Spokes辐条螺纹接头用钢丝123.IS 8565: 1977Heald Wire综丝124.IS 8566: 1977Steel Wire For Reeds钢筘用钢丝125.IS 8917: 1978Plates For Galvanizing Pots镀锌板126.IS 9442: 1980Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs农用圆盘制造用热轧钢板和钢带127.IS 9485: 1980Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling搪瓷用冷轧和热轧碳素钢板128.IS 10794: 1984Mild steel wire for cotter pins开口销用低碳钢丝129.IS 12262:1988Trapezoidal Steel Wire For Springs Washers弹簧垫圈用梯形钢丝130.IS 12313: 1988Hot-Dip Terne Coated Carbon Steel Sheets热浸镀镀碳钢板131.IS 15911:2010Structural Steel (Ordinary Quality)结构钢（一般质量）132.IS 4430: 1979Mould Steels模具钢133.IS 4431: 1978Carbon And Carbon- Manganese Free- Cutting Steels碳和碳锰易切削钢134.IS 4432: 1988Case Hardening Steels表面硬化钢135.IS 5518: 1996Steels For Die Blocks For Drop Forging模锻模架用钢136.IS 8748: 1978Forged/Rolled CTC Segments锻造/轧制CTC段137.IS 12145: 1987Quenched And Tempered Alloy Steel Forgings For Pressure Vessels压力容器用调质合金钢锻件138.IS 13387: 1992Tool Steel Forgings For Metal Forming金属成形用工具钢锻件139.IS 14698:1999Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services防务用壳体和防弹弹用碳素钢和低合金钢坯、板坯和棒材140.IS/ISO 11951 : 2016Cold – Reduced tinmill products – Blackplate冷还原锡板厂产品-黑板141.IS 3930: 1994Flame And Induction Hardening Steels感应淬火和火焰淬火钢142.IS 5478: 1969Thermostat Metal Sheet and Strip恒温器金属薄板和带材143.IS 13352: 1992Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs由连铸坯、钢坯和板坯生产的锻件用坯料144.IS 16644: 2018Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete预应力混凝土用应力消除低松弛钢丝145.IS 17404 : 2020Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips电镀锌热轧和冷轧低碳钢板和钢带146.IS 8329 : 2000Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage水、气、污水用离心铸造（旋压）球墨铸铁管147.IS 9523:2000水、气、污水压力管道用球墨铸铁配件Ductile iron fittings for pressure pipes for water, gas and sewage148.IS 1161:2014Steel tubes for structural purposes结构用钢管149.IS 1239 (Part 1):2014Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes钢管、管件和其他锻钢配件第1部分：钢管150.IS 4270:2001Steel tubes used for water-wells (upto 200 mm dia)水井用钢管（直径小于等于200 mm）151.IS 9139:1979Specification for Malleable iron shots and grits for use in foundries铸造用可锻铸铁粒和沙粒规范