西安市MedAccred _AC8102热处理基准审核标准【15】
12.12.1 (EC) Hardness Testing - Table
|
REQUIREMENT |
SHOP PAPER REQUIREMENT |
ACTUAL |
|
|
Hardness/Tensile range |
(EC) |
(EC) |
(EC) |
|
Hardness converted from Tensile |
(EC) |
(EC) |
(EC) |
|
Samples or Parts tested |
(EC) |
(EC) |
Only record if a part or sample was tested |
|
Test frequency |
|||
|
Converted hardness recorded |
(EC) |
(EC) |
(EC) |
12.12.2 Does the hardness obtained conform to specification? YES/NO
12.12.3 Is the operator currently qualified and/or certified to perform Hardness Testing? YES/NO
12.13 Conductivity Testing SECTION NA
12.13.1 (EC) Conductivity Testing
|
REQUIREMENT |
SHOP PAPER REQUIREMENT |
ACTUAL |
|
|
Conductivity range |
(EC) |
(EC) |
(EC) |
|
Test method |
(EC) |
(EC) |
(EC) |
|
Samples or Parts tested |
*record if sample or part tested |
12.13.2 Does the conductivity obtained conform to specification? YES/NO
12.13.3 Is the operator currently qualified and/or certified to perform Conductivity Testing? YES/NO
12.14 Additional Periodic and Lot testing required: (Charpy impact, Tensile test, Fracture toughness, Metallographic and/or Microhardness tests, etc.) SECTION NA
12.14.1 (EC) Additional testing required by the specification:
12.14.2 (EC) Shop paper requirement for additional testing:
12.14.3 (EC) Actual additional testing results: